Replace Cartridge or Cartridge Not Recognized Error in Epson XP600 / XP800 Continuous Ink System

Wed, 26 Nov 2014 05:11:42 -0500
Bookmark and Share

When you get the “Replace Cartridge “ or “Cartridge not recognized” message, follow these steps:

a. Press the OK button on the printer, open the scanner unit cover, and then remove the plastic part from the sensor slot so that the cartridges move into the replacement position.

About bison3D Filaments

Tue, 25 Nov 2014 03:11:12 -0500
Bookmark and Share


About bison3D 3D Filaments - ABS and PLA

Resetting Some Common HP Errors

Thu, 20 Nov 2014 04:43:57 -0500
Bookmark and Share

hp-error.jpgSome errors such as “Ink system failure”, “Scanner system failure” and similar error messages on HP printers can be resolved quickly in some cases.  They are usually related to the printer not recognizing the cartridges, so check that you have a good contact with the chips on the cartridge (if the cartridges have chips) first, and then try these procedures:

Epson Resetter - How to Reset Epson Inkjet Cartridges

Thu, 13 Nov 2014 01:22:23 -0500
Bookmark and Share

chip-resetter-for-epson.jpgTHE UNI-KIT CHIP RESETTER is used to reset the chip on an Epson inkjet cartridge, and does not change the property of the cartridge itself. In order to reuse an Epson ink cartridge, it needs to be both “reset” and “refilled”.

Inkjet: My cartridge is not recognized

Fri, 07 Nov 2014 06:28:44 -0500
Bookmark and Share

my-inkjet-cartridges-not-recognized.pngWhat does it mean when an inkjet cartridge is not being recognized by the printer?

Brother CIS (continuous ink system)

Tue, 28 Oct 2014 04:51:03 -0400
Bookmark and Share

brother-cis.jpgBrother CIS systems

The Brother CIS systems are created a little different from the conventional CIS.  Brother model do not require separate tanks with tubing since the cartridges feed ink into an internal tubing mechanism.

Dell Inkjet Cartridges:Low Ink or out of ink message

Tue, 21 Oct 2014 04:49:06 -0400
Bookmark and Share

dell_dialog.jpgYou may encounter a low ink message when trying to print.  DO NOT be alarmed.  This is very common because you are using a remanufactured or recycled inkjet cartridges.  The ink gauge on your printer will no longer read the ink levels correctly because it does not recognize your cartridge as “new”.  There is no way to reset this gauge, but this message can be bypassed easily when necessary and will not affect your printing performance.  Keep in mind that the ink gauges on printers only serve as an ESTIMATE of how much ink may be remaining in the cartridge.

How to change the chip on the Konica Minolta 2400

Mon, 20 Oct 2014 06:53:57 -0400
Bookmark and Share



Replacement chips are available for those customers who want to restore the “toner level monitoring” features that the chips have. If you have bought the replacement chip, please follow these simple chip replacement instructions: